Check the travel direction of the excavating machine before driving it. Make sure you know how to operate the crawler excavator’ control levers and pedals. Press the upper part of the control pedal or push the control lever forward to move the crawler excavator in the direction of the idlers. Work equipment of the digger should be kept 20-30cm (8-12 in) off the ground when moving on a slope. wheel excavator
In case of an emergency, the work equipment could be lowered to ground immediately to help stop the digging machine.40 ton excavator When driving the crawler excavator up a slope, face the cab to the uphill direction; when driving down a slope, face the cab to the downhill direction.Before traveling, always check the hardness of ground before your excavating machine.When driving the crawler excavator up a slope, extend the work equipment to keep balance. 20 tonne excavator Keep the work equipment 20-30cm (8-12in) off the ground and drive the digging machine slowly.When driving down a slope, lower the engine speed, keep the travel control levers close to "neutral" position and drive the crawler excavator slowly. 3 tonne excavator
Driving the excavating machine on a slope may cause it to slip or tumble down, resulting in serious injury or death.Drive the crawler compact excavator straight up and down a steep slope because it is very dangerous to turn on or drive across a slope.To adjust the position of the excavator on a slope, drive it onto a flat surface, reposition it and driving the digger to the slope again.mini excavators for sale Drive at low speed on meadow, fallen leaves or wet steel plate because even a small grade could cause the crawler excavator to slip.
